|
Subaru Starter to VW bellhousing adaptor - CK001
The factory VW starter is an old-skool direct drive design, If you are running a High Performance donk or have swapped in a later model water cooled engine in your VW then you will find the factory starters less then adequate.
With many people choosing the transplant subaru EJ series motors into Aircooled VW's the logical choice was to make an adaptor plate and pinion to suit a Subaru starter motor.
After market hi-torque starters are expensive and can be difficult to source. They also crank over slower then many factory starters. By using a cranky kit and a factory subaru starter you are using a starter designed to start a modern engine.
Kits Consists of:
- 1 x Machined alloy adaptor plate with mounting flange for gearbox and starter.
- 1 x Cranky Kits custom replacement pinion.
- 1 x Detailed instructions for fitting the kit.
- All mounting Hardware/Bolts.
CK001 can be used on an 091 (2L Kombi) gearbox/bell housing.
.... PLEASE NOTE ....
The Crankykits factory will be shutdown for maintenance from 20th April 2011 until 20th May 2011. Order will no be process until after 20th May 2011.
CK001 For 091 bellhousing is AU $250
Postage Australia wide is $10
CK001 For 091 bellhousing with second hand starter is AU $360
We are also able to supply a second hand working starter for use with CK001 for an additional AU $110 in GST. Postage of Starter and CK001 is AU $20 Australia Wide
Email
info @ crankykits.com.au with your enquiries.
Cranky Kits are also available from Custom Vee Dub
|
